The automatic coating machine is professional equipment, which can coat the anode and cathode material on matrixmaterial (copper foil, aluminum foil), designed and developed by my company, mainly used for the manufacture of Li-ion, Li-polymer and power cells, and super capacitors film. The machine’s“low carbon environmental protection, energy efficiency utility”.With development of battery materials, adding Japanese elements of lean manufacturing, so that “high reliability, high precision, high efficiency, low energy consumption”, the feature can be fully realized

SYD-Q-6ZDNT-700

Requirement of specifications：

1、Aluminum foil: 0.012-0.030mm

               Cooper foil: 0.007-0.030mm

2、250~750mm Base material width: 250~750mm

3、The maximum thickness of coating: 50-300um (the viscosity slurry should be moderate)

4、The maximum width of valid coating: 700mm

5、Coating speed:0.5-12 m/min (according to difference slurry

6、Outline dimensions(L×W×H)： (2/3m×n+6m) ×1.8m×2.7m

7、Power:10KW×n

Performance of the equipment：

1、Coating ways : intermittent coating and continuous coating

2、Precise of coating

3、Tension control: using tension control closed-loop system, continuous adjustable

4、Precision of correct controller:±0.01mm

5、Adding linear mixing on fed slot, speed of mixing according the viscosity of slurry adjustable

6、Drying way

Air way: hot air circulation (top supply hot air) or gas suspension

Adjusting flow and pressure : manual or frequency conversion adjustment.

7、Length of oven:2/3m×n

8、Temperature of oven :room temperature 150℃,6independently adjustable, precise of temperature control﹤±5℃

9、pole piece quality parameters interface